User's Manual

Use the navigation controls to configure ABS as follows:
1. Access the top function menu from the driving
screen.
2. Navigate to the Advanced menu.
or then
3. Navigate to the ABS submenu.
or then
Value Description
Active Enables or disables ABS
Trigger
A percentage (1-100%, default
50) indicating the braking
threshold above which ABS is
triggered
Delay
The time in seconds (0.0-2.0,
default 0) the brake must be
above the trigger level before
ABS engages
Depth
A percentage (1-100, default 50)
indicating the reduction in
braking force during the ABS
coast phase. Setting Depth to
100% returns to full coast
between brake pulses; setting
Depth to 0% leaves braking force
unchanged (this effectively
disables ABS).
Brake
Time
When ABS is engaged, time in
seconds (0.1-5.0, default 1.0)
during which brakes are applied
at full strength
or
Coast
Time
When ABS is engaged, time in
seconds (0.1-5.0, default 1.0)
during which brake pressure is
reduced
Failsafes
You can set up the failsafe positions of the servos
so that in the event of loss of signal, the servos go
to their set failsafe positions. Default failsafe
positions are centered steering and trim.
You should always set your failsafe positions after