User's Manual

Value Description
Input/Throttle
Speed
The amount of limiting applied to servo throttle
motion once the trigger amount has been
exceeded.
4. Change the values.
or
Return/Brake
Speed
The amount of limiting applied to servo brake
motion once the trigger amount has been
exceeded.
Trigger
The percentage of full throttle range that will be
limited.
Brake Trigger
The percentage of full braking range that will be
limited.
Interaction with other Settings
Servo Speed is applied after Expo. The trigger levels refer to the curved input value.
ABS is applied after Brake Speed, so Brake Speed can limit how quickly the brake input moves to the
ABS Active region, but once there ABS pulses happen at full speed.
Servo Speed is applied after AutoStart, so if the AutoStart Level is set higher than the Throttle Speed
Trigger, the servo movement will be slowed.
Idle Up only takes effect when the trigger is centered. Throttle Speed can slow down the return to
center and therefore slow down Idle Up activation. Once Idle Up is started, the servo will jump to the
set position.
Advanced Features
The following illustration shows the function menu structure for the advanced functions: