User's Manual

3. Navigate to Servo Reverse.
or
Value Description
Off
Standard servo direction.
4. Change the value.
On Reversed servo direction.
Channel 3 / 4 Servo Type
Servo type lets you select the type of servo
(analog or digital) in the vehicle. Analog servos
are sent signals at 50 frames/sec, while Digital
servos are sent signals at 100 frames/sec.
If you are running an electric car with an ESC, it
may perform better with the digital setting. Some
ESCs may not operate at all with the higher frame
rate. Try both settings and choose the best
performance.
Changing the Channel 3 / 4 Servo Type
Use the navigation controls to change the shift servo type as follows:
1. Access the top function menu from
the driving screen.
2. Navigate to the Channel 3 or
Channel 4 menu.
or then
3. Navigate to Servo Type.
or
Value Description
Analog Shift servo is analog.
4. Change the value.
Digital Shift servo is digital.