User's Manual

12
When installing on a nitro motor, place the sensor as low as possible on the head, opposite
the exhaust port. The sensor may also be installed on an electric motor, battery pack, or ESC
heat sink.
Connection
Connecting the Temperature Sensor
After you install the temperature
sensor in the vehicle, plug it into the
“Sensor 1” or “Sensor 2” receptacle.
The four-pin connector on the sensor
cable has only three wires populated.
The unpopulated pin should be the
one furthest from the connector key
in the receiver plastic.
The Sensor transceiver will
automatically detect which sensors
are installed.
Unused Pin
Connected Pins