User's Manual

86
Using the Sensor Digital RC Desktop
Using the Sensor Digital RC DesktopUsing the Sensor Digital RC Desktop
Using the Sensor Digital RC Desktop
To start the RC Desktop
From the START menu, click (All) Programs, Nomadio Digital RC Desktop,
then Nomadio Digital RC Desktop.
To make changes to the
settings
Navigate through the functions of the RC Desktop, and make changes as
appropriate to global settings, or to settings for individual models.
To open a saved settings file
From the File menu, click Open….
To save the current settings
into a file
From the File menu, click Save.
To create a new model
From the File menu, click Create New Model, or right click on the file name at
the top of the tree on the left, and select Create New Model.
To copy a model
In the tree on the left, right click on the model that you wish to copy. On the
popup menu, select Copy Model. A new model will be created that is a copy of
the selected model (though the name is not copied)
To delete a model
In the tree on the left, right click on the model that you wish to copy. On the
popup menu, select Delete Model.
To receive the current
settings from the Sensor
1. Connect the Sensor to your computer.
2. Turn on the Sensor.
3. From the Connection menu, click Receive Settings from Sensor.
To send the RC Desktop’s
current settings to the Sensor
1. Connect the Sensor to your computer.
2. Turn on the Sensor.
3. From the Connection menu, click Send Settings to Sensor.
To install the latest firmware
into the Sensor
1. Connect the Sensor to your computer.
2. Turn on the Sensor.
3. From the Connection menu, click Install Latest Sensor Firmware.
To update the RC Desktop to
the latest version
From the Help menu, click Software Updates.
Registration
RegistrationRegistration
Registration
1. When you start the Digital RC Desktop the first time, you will be prompted to register.
Click Yes to continue. If you click No, you can register you will be prompted again the
next time you start the Digital RC Desktop. You can register immediately by choosing
the Help menu and then choosing Register new Sensor.