User's Manual

Rebinding

You can rebind to the transceiver in a specific model

(identified by a model profile). An example of when

you might use this function would be if you replaced

a transceiver on your car – you need to tell the

Sensor and the new transceiver to look for each

other.

Rebinding to a Model

Use the controls to rebind to a model as follows:

1. Access the top function menu from

the driving screen.

2. Navigate to the Manage Models

menu.

or : then

3. Navigate to Active Model.

4. Navigate to the model you want to

rebind with.

5. Navigate to and activate Rebind.

or : then

6. If the receiver was previously bound to a different Sensor, turn on the model and perform the binding process

again by activating the Bind button until the LED illuminates. Otherwise, just turn on the model.