User's Manual

64
Failsafes
You can set up the failsafe positions of the servos so that
in the event of loss of signal, the servos go to their set
failsafe positions. Default failsafe positions are centered
steering and trim.
Setting Failsafe Modes
Use the navigation controls to set the failsafe modes as follows:
1. Access the top function
menu from the driving screen.
menu
2. Navigate to the Advanced
menu.
or : then
3. Navigate to the Failsafe
menu.
or : then
4. Navigate to Steering.
or
Value Description
Hold Steering servo holds last known position.
5. Change the steering servo
failsafe setting.
or
Set Steering servo goes to set failsafe position.
6. Navigate to Throttle.
or
Value Description
Hold Throttle servo holds last known position.
7. Change the throttle servo
failsafe setting.
or
Set Throttle servo goes to set failsafe position.
8. Navigate to Shift (Ch3).
or
Value Description
Hold Shift servo holds last known position.
9. Change the shift servo
failsafe setting.
or
Set Shift servo goes to set failsafe position.
10. Navigate to Ch4.
or
11. Change the Ch4 servo
failsafe setting.
or
Value
Hold
Set
Description
Ch4 servo holds last known position.
Ch4 servo goes to set failsafe position.