User's Manual

63
Configuring ABS
Use the navigation controls to configure ABS as follows:
1. Access the top function menu from the driving
screen.
menu
2. Navigate to the Advanced menu.
or
: then
3. Navigate to the ABS submenu.
or
: then
Value Description
Active Enables or disables ABS
Trigger
A percentage (0-100%, default 50)
indicating the braking threshold
above which ABS is triggered
Delay
The time in seconds (0.0-2.0, default
0) the brake must be above the
trigger level before ABS engages
Depth
A percentage (0-100, default 50)
indicating the reduction in braking
force during the ABS coast phase.
Setting Depth to 100% returns to
full coast between brake pulses;
setting Depth to 0% leaves braking
force unchanged (this effectively
disables ABS).
Brake
Time
When ABS is engaged, time in
seconds (0.1-5.0, default 1.0) during
which brakes are applied at full
strength
or
Coast
Time
When ABS is engaged, time in
seconds (0.1-5.0, default 1.0) during
which brake pressure is reduced