User's Manual

62
AutoStart
AutoStart is used to get that slight extra edge from
a standing start. When AutoStart->Armed is On and
the trigger is pulled more than
AutoStart->Trigger
percent, the throttle is held at
AutoStart->Level
percent until the trigger is returned to neutral.
AutoStart->Armed automatically turns off. This is
used either to limit throttle input at the start to
avoid spinning on a low traction surface, or with a
low trigger and high level to get an extra-quick
punch off the line on a high traction surface.
Configuring AutoStart
Use the navigation controls to configure AutoStart as follows:
1. Access the top function menu from the driving
screen.
menu
2. Navigate to the Advanced menu.
or
: then
2. Navigate to the Idle Up submenu.
or
: then
Value Description
Armed Enables or disables the AutoStart function
4. Change the values.
or
Level
The position (0 to +100) at which the
throttle is to be maintained during AutoStart
Trigger
The percentage of trigger pull (0-100%) at
which AutoStart engages
Antilock Braking System (ABS)
Sensor supports ABS brakes to give better traction
during stopping.