User's Manual

61
Vibe: Connect Vibe,
Disconnect Vibe
disconnecting from
transceiver
Alert Over
N/A Sound: Alert Over
Vibe: Alert Over Vibe
Notification when a
sensor returns to
normal operating
range after an alert
Startup
N/A Sound: Startup
Vibe: Startup Vibe
Action at power-up,
during splash screen
display
Menu
N/A Sound: Key Click, Save,
Prompt
Vibe: Click Vibe, Save
Vibe, Prompt Vibe
Notification when
navigating through
menu system,
clicking keys and
saving settings
Shift
N/A Sound: Down shift, Up
shift
Vibe: Shift Vibe
Notification when the
shift (grip) button is
pressed
Trim
N/A Sounds: Trim down,
Trim up, Trim bottom,
Tim top, Trim center
Notification when
user adjusts the trim
positions
Idle Up
Idle Up changes the throttle servo position when
the trigger is centered, it has no affect at other
trigger positions. When Idle Up -> Active is On and
the trigger is centered, the throttle moves to Idle
Up -> Level percent. This is typically used to warm
up a nitro engine by running it at high idle (just shy
of the clutch engaging).
Configuring Idle Up
Use the navigation controls to configure Idle Up as follows:
1. Access the top function menu from the driving
screen.
menu
2. Navigate to the Advanced menu.
or
: then
2. Navigate to the Idle Up submenu.
or
: then
Value Description
Active
Controls whether the Idle Up feature is
being used
4. Change the values. or
Level
The position (-100 to +100) to which the
throttle should go when idling