User's Manual

55
Channel 3 /4 Servo Reverse
Servo reversing reverses the
direction the shift servo moves
upon receiving an input from
the grip buttons.
Changing the Channel 3 / 4 Servo Reverse Setting
Use the navigation controls to change the servo reverse setting as follows:
1. Access the top function menu
from the driving screen.
menu
2. Navigate to the Shift (Ch3)
or Channel 4 menu.
or : then
3. Navigate to Servo Reverse.
or
Value Description
Off Standard servo direction.
4. Change the value.
or
On Reversed servo direction.
Channel 3 / 4 Servo Type
Servo type lets you select the type of servo (analog or
digital) in the vehicle. Analog servos are sent signals
at 50 frames/sec, while Digital servos are sent signals
at 100 frames/sec.
If you are running an electric car with an ESC, it may
perform better with the digital setting. Some ESCs
may not operate at all with the higher frame rate. Try
both settings and choose the best performance.