User's Manual

53
Use the navigation controls to adjust the low end point as follows:
1. Access the top function menu
from the driving screen.
menu
2. Navigate to the Shift (Ch3) or
Channel 4 menu.
or : then
3. Navigate to Low End Point.
or
Value Description
0
Minimum low end point; allows NO travel to low
end.
1-99
Low end point value is set to a percentage of
travel range to low end.
For example, a value of “50” gives 50% of full
travel to low end.
4. Change the value.
or
100
Maximum low end point; allows FULL travel to low
end.
Trim and EPA Interaction
A trim (or sub-trim) setting of 100 is equivalent to an End point setting of 25.
High End Point
The shift servo high end point
value adjusts the servo’s ending
position after shifting upwards.
This is intended to be high gear
and goes with the upshift sound
event. The end point adjustments
should be adjusted prior to other
settings.
The high end point is set
independently of the low end point
(which adjusts how far the servo
moves to the LOW turns end).
Steering (Ch1)
Throttle (Ch2)
Shift (Ch3)
Ch
4
Ch3 / Ch4 High End Points
On the driving screen, the high end point is represented by the length of the
bar to the right of the pointer on the upper bar. The greater the right length
of the bar, the greater the high end point value.
The position of the pointer on the bar is affected by end point
settings (low and high) and trim setting.