User's Manual

Changing the dual rate setting has the following visual effect on the driving screen bars:

Full servo range is used.

Lower dual rate value reduces servo range.

Adjusting Channel 3 /4 Servo Dual Rate

Use the navigation controls to adjust servo dual rate as follows:

1. Access the top function menu

from the driving screen.

2. Navigate to the Shift (Ch3)

or Channel 4 menu.

or : then

3. Navigate to Dual Rate.

Value Description

0 Servo range is set to minimum (0%).

1-99

Servo range is set to a percentage of full range.

For example, value “50” gives 50% of full servo

range.

4. Change the value.

100 Servo range is set to full (100%)

Dual Rate and End Point Adjustment

Full servo range is determined by the shift servo low and high end point adjustments. The dual

rate value determines the relative servo range between the low and high end points. The

servo will never move beyond the set end point adjustments, no matter what dual rate setting

is applied.

Low End Point

The servo low end point value

adjusts the shift servo’s starting

position at reset. This is intended

to be low gear and goes with the

downshift sound event. The end

point adjustments should be

adjusted prior to other settings.

The low end point is set

independently of the high end

point (which adjusts how far the

servo moves to the HIGH end).