User's Manual

49
Channel 3 and Channel 4 Servo Functions
Channel 3 and Channel 4 Servo FunctionsChannel 3 and Channel 4 Servo Functions
Channel 3 and Channel 4 Servo Functions
Each of these servos can be used as a number of auxiliary functions such as shifting or acting
as a second braking or steering servo. The following illustration shows the function menu
structure for Channel 3 (Shift) and Channel 4 (Power):
Ch3 or Ch4
Trim
Dual Rate
Low End Point
High End Point
Servo Reverse
Servo Type
Servo Mode
Servo Speed
-100 to 100
0 to 100
-100 to 0
0 to 100
Off, On
Analog, Digital
Off, Toggle, Hold, 4WS, Thr/Brake
Inp/Thr ,Rtn/Brk ,Trigger, Brk Trigger
Channels 3 / 4 Servo Trim
Channel 3 and Channel 4
servo trim adjusts the resting
(centered) positions of the
servos.
When initially setting up the
vehicle, the shift servo trim
setting should be set to 0. On
the servo, the servo horn
should be positioned as
appropriate on the servo.
Steering (Ch1)
Throttle (Ch2)
Shift (Ch3)
Ch4
Ch3 and Ch4 Trim
s
On the driving screen, Channel 3 and Channel 4 servo trims are represented
by the position of the pointers on the bottom bars.