User's Manual

47
Changing the Throttle Servo Type
Use the navigation controls to change the throttle servo type as follows:
1. Access the top function menu
from the driving screen.
menu
2. Navigate to the Throttle (Ch2)
menu.
or : then
3. Navigate to Servo Type.
or
Value Description
Analog Throttle servo is analog.
4. Change the value.
or
Digital Throttle servo is digital.
Throttle Speed
Throttle speed allows you to limit the maximum
speed that the throttle servo will be driven to match
your movements on the trigger. There are four
parameters that can be adjusted to precisely set up
your limiting.
Throttle Speed determines the percentage of full
speed that is applied to the throttle movements that
are above the throttle trigger setting. 100 is
maximum servo movement rate. 1 is minimum rate.
Default is 100 (full speed).
Brake Speed determines the percentage of full speed
that is applied to braking movements that are above
the trigger setting. 100 is maximum servo movement
rate. 1 is minimum rate. Default is 100 (full speed).
Throttle Trigger sets the minimum amount of control
input before the speed limiter becomes active. At 0%,
limiting is always active (input is always >= 0%). At
50%, limiting is only active if the throttle is on half
way or more.
Brake Trigger sets the minimum amount of control
input before the speed limiter becomes active. At 0%,
limiting is always active (input is always >= 0%). At
50%, limiting is only active if the brake is on half way
or more.