User's Manual

43
Adjusting the Brake End Point
The brake end point value is a relative value, and is expressed as the percentage of full travel
to the BRAKE end. For example, setting the brake end point value to “50” allows the throttle to
go to only 50% of full brake.
Use the navigation controls to adjust the brake end point as follows:
1. Access the top function menu
from the driving screen.
menu
2. Navigate to the Throttle (Ch2)
menu.
or : then
3. Navigate to Brake End Point.
or
Value Description
0
Minimum brake end point; allows NO brake
travel.
1-99
Brake end point value is set to a percentage
of full braking travel.
For example, a value of “50” gives 50% full
brake travel.
4. Change the value.
or
100
Maximum brake end point; allows FULL brake
travel.
Trim and EPA Interaction
A trim (or sub-trim) setting of 100 is equivalent to an End point setting of 25.