User's Manual

30
Use the navigation controls to adjust the right end point as follows:
1. Access the top function menu
from the driving screen.
menu
2. Navigate to the Steering (Ch1)
menu.
or : then
3. Navigate to Right End Point.
or
Value Description
0
Minimum right end point; allows NO turning
motion to the right.
1-99
Right end point setting is set to a percentage of
full right-turning range. For example, a value of
“50” gives 50% of full right-turning range.
4. Change the value.
or
100
Maximum right end point; allows FULL right-
turning range.
Trim and EPA Interaction
A trim (or sub-trim) setting of 100 is equivalent to an End point setting of 25.
Steering Servo Reverse
Steering servo reversing
reverses the direction the servo
moves upon receiving an input
from the steering wheel.
Changing the Steering Servo Reverse Setting
Use the navigation controls to change the steering servo reverse setting as follows:
1. Access the top function menu from
the driving screen.
menu
2. Navigate to the Steering (Ch1)
menu.
or : then
3. Navigate to Servo Reverse.
or
Value Description
Off Standard servo direction.
4. Change the value.
or
On Reversed servo direction.