User's Manual

28
Use the navigation controls to adjust the left end point as follows:
1. Access the top function menu from
the driving screen.
menu
2. Navigate to the Steering (Ch1)
menu.
or : then
3. Navigate to Left End Point.
or
Value Description
0
Minimum left end point; allows NO turning
motion to the left.
1-99
Left end point value is set to a percentage of
full left-turning range. For example, a value of
“50” gives 50% of full left-turning range.
4. Change the value.
or
100
Maximum left end point; allows FULL left-
turning range.
Trim and EPA Interaction
A trim (or sub-trim) setting of 100 is equivalent to an End point setting of 25.
Steering Right End Point
The steering right end point
value adjusts how far the
steering servo turns to the
RIGHT with respect to its full
range of motion to the right.
End point adjustment should
be adjusted prior to other
steering settings, as the right
end point value affects other
steering settings.
The right end point is set independently of the left end point (which adjusts how far the
steering servo turns to the LEFT). The right end point setting should be used to do the
following:
• Limit steering throw to reduce mechanical binding or servo strain that may occur on full
servo throw to the right. For example, if the servo is trying to turn the steering system
to the right farther than it is mechanically able.
• Adjust steering throw to change steering characteristics when turning to the right.
For example, if your car is oversteering when turning to the right, then reduce the Right
End Point value to reduce the range of the steering servo on the right.