User's Manual

Steering Dual Rate

Steering dual rate adjusts the

range of servo movement when

the steering wheel is fully turned

in either the left or right

direction. This is used to increase

or decrease the steering

sensitivity across the entire servo

range. The steering dual rate

value is applied to both left and

right sides, and is expressed as a

percentage of servo range

(configured by end point

adjustments).

Steering (Ch1)

Throttle (Ch2)

Shift (Ch3)

Ch4

Dual Rate Range

On the driving screen, steering dual rate range is represented by

the solid length of the upper bar.

The total length of the bar (solid and dotted) represents the servo

range. The length of the solid bar represents the range set by the

dual rate value.

As you change the dual rate setting it is shown graphically on the driving screen trim indicator

bars:

Full servo range is used.

Lower dual rate value reduces servo range.

Adjusting Steering Dual Rate using the Function Menu

Use the navigation controls to adjust steering dual rate as follows:

1. Access the top function menu

from the driving screen.

2. Navigate to the Steering (Ch1)

menu.

or : then

3. Navigate to Dual Rate.

Value Description

0 Steering servo range is set to minimum (0%).

1-99

Steering servo range is set to a percentage of

full range.

For example, value “50” gives 50% of full

servo range.

4. Change the value.

100 Steering servo range is set to full (100%)