User's Manual

12
When installing on a nitro motor, place the sensor as low as possible on the head, opposite
the exhaust port. The sensor may also be installed on an electric motor, battery pack, or ESC
heat sink.
Connection
Connecting the Temperature Sensor
After you install the temperature sensor in the
vehicle, plug it into the “Sensor 1” or “Sensor 2”
receptacle.
The four-pin connector on the sensor cable has
only three wires populated. The unpopulated
pin should be the one furthest from the
connector key in the receiver plastic.
The Sensor transceiver will automatically detect
which sensors are installed.
Unused Pin
Connected Pins