User's Manual

C: Swap the Assemblies

C1. Pass the steering wheel connector wire through the

Sensor body so it comes out the LEFT side hole (where

the speaker used to be).

C2. Pass the speaker connector wire through the

Sensor body so it comes out the RIGHT side hole

(where the steering wheel used to be).

D: Re-assemble

D1. Reconnect the speaker wire to the speaker

assembly. Be careful not to over tighten and break the

speaker clamp.

D2. Reconnect the steering wheel wire connector to the

steering wheel.

D3. Reattach the speaker assembly to the RIGHT side

of the Sensor body.

D4. Reattach the steering wheel assembly to the LEFT

side of the Sensor body.

D5. Reattach the steering wheel.

Make sure the steering wheel has full left-and-right

movement.

D6. Reinsert the Nomadio emblem in the center of the

steering wheel.