User's Manual

Converting for Left Handed Use

You can easily convert the Sensor to left-handed use.

Tools needed:

#2 Phillips screwdriver,

7/64” hex wrench

A: Remove the Steering Wheel Assembly

A1: Make sure the Sensor is turned off

A2. Carefully remove the Nomadio emblem in the

center of the steering wheel. It is held in place by

friction and pulls toward you, it does not twist.

A3. Use the Phillips screwdriver to loosen and remove

the screw holding the steering wheel. Remove the

steering wheel.

A4. Use the hex wrench to remove the three screws

holding the steering wheel assembly.

A5. Carefully pull the steering wheel assembly away

from the Sensor body.

A6. Carefully unplug the connector from the steering

wheel assembly.

B: Remove the Speaker Assembly

B1. Use the hex wrench to remove the four screws

holding the speaker assembly.

B2. Pull the speaker assembly away from the Sensor

body.

B3. Carefully unplug the connector from the speaker

assembly