User's Manual

Trim and EPA I nteraction

A trim (or sub-trim) setting of 100 is equivalent to an End Point setting of 20.

High End Point

The shift servo high end point

value adjusts the shift servo’s

ending position after shifting

upwards. This is intended to

be high gear and goes with

the upshift sound event. The

end point adjustments should

be adjusted prior to other

settings.

The high end point is set

independently of the low end

point (which adjusts how far

the shift servo moves to the

LOW turns end).

Steering (Ch1)

Throttle (Ch2)

Shift (Ch3)

High End Point

On the driving screen,

the high end point is

represented by the

length of the bar to the

right of the pointer on

the upper bar.

The greater the right

length of the bar, the

greater the high end

point value.

The position of the

pointer on the bar is

affected by end point

settings ( low and

high) and trim

setting.

Changing the high end point value has the following visual effect on the driving screen bars.

High end point value is approximately the same as the low end point

value.

Increased high end point value (more servo travel on HIGH end is

possible).

Decreased high end point value (less servo travel on HIGH end is

possible).