User's Manual

Adjusting Shift Servo Trim

Use the navigation controls to adjust shift servo trim as follows:

1. Access the top function menu

from the driving screen.

men

2. Navigate to the Shift ( Ch3)

menu.

or : then

3. Navigate to Trim.

Value Description

0 Shift servo trim is centered within the

servo range.

-ve value

(-100 Æ -1)

Shift servo trim is to the LOW end.

4. Change the value.

+ ve value

(1 Æ 100)

Shift servo trim is to the HI GH end.

Trim and EPA I nteraction

A trim (or sub-trim) setting of 100 is equivalent to an End Point setting of 20.

Shift Servo Dual Rate

Shift servo dual rate adjusts the

range of servo movement when

the grip buttons are activated.

The shift servo dual rate value is

applied to both low and high

ends, and is expressed as a

percentage of servo range

(configured by end point

adjustments).

Steering (Ch1)

Throttle (Ch2)

Shift (Ch3)

Dual Rate Range

On the driving screen,

shift servo dual rate

range is represented by

the solid length of the

bottom bar.

The total length of the

bar (solid and dotted)

represents the servo

range. The length of the

solid bar represents the

servo range as set by

the dual rate value.