User's Manual

45
Throttle Speed
Throttle speed allows you to limit the maximum speed
that the throttle servo will be driven to match your
movements on the trigger. There are four parameters
that can be adjusted to precisely set up your limiting.
Throttle Speed determines the percentage of full speed
that is applied to the throttle movements that are
above the throttle trigger setting. 100 is maximum
servo movement rate. 1 is minimum rate. Default is
100 (full speed).
Brake Speed determines the percentage of full speed
that is applied to braking movements that are above
the trigger setting. 100 is maximum servo movement
rate. 1 is minimum rate. Default is 100 (full speed).
Throttle Trigger sets the minimum amount of control
input before the speed limiter becomes active. At 0% ,
limiting is always active (input is always > = 0% ). At
50% , limiting is only active if the throttle is on half way
or more.
Brake Trigger sets the minimum amount of control
input before the speed limiter becomes active. At 0% ,
limiting is always active (input is always > = 0% ). At
50% , limiting is only active if the brake is on half way
or more.