User's Manual

The position of the pointer on the bar is affected by end point values (throttle and

brake) and trim setting; increasing the throttle end point value may visually appear to

have the same effect as decreasing the brake end point value.

Adjusting the Throttle End Point

The throttle end point value is a relative value, and is expressed as the percentage of full

travel to the THROTTLE end. For example, setting the throttle end point value to “50” allows

the throttle to go to only 50% of full travel to the throttle end.

Use the navigation controls to adjust the throttle end point as follows:

1. Access the top function menu from

the driving screen.

men

2. Navigate to the Throttle ( Ch2)

menu.

or : then

3. Navigate to Throttle End Point.

Value Description

0 Minimum throttle end point; allows NO throttle.

1-99

Throttle end point value is set to a percentage

of full throttle travel.

For example, a value of “50” gives 50% full

throttle travel.

4. Change the value.

100

Maximum throttle end point; allows FULL

throttle travel.

Trim and EPA I nteraction

A trim (or sub-trim) setting of 100 is equivalent to an End Point setting of 20.

Throttle Servo Reverse

Throttle servo reversing

reverses the direction the

throttle servo moves upon

receiving an input from the

throttle trigger.