User's Manual

32
Steering (Ch1)
Throttle (Ch2)
Shift (Ch3)
Throttle Trim
On the driving screen,
throttle trim is
represented by the
position of the pointer
on the middle bar.
Changing the throttle trim has the following visual effect on the driving screen bars:
Throttle trim is centered in range (value = 0)
Throttle trim is offset to throttle end (+ ve value)
Throttle trim is offset to brake end (-ve value)
Adjusting Throttle Trim using the Function Menu
Use the navigation controls to adjust throttle trim as follows:
1. Access the top function menu from
the driving screen.
men
u
2. Navigate to the Throttle ( Ch2)
menu.
or : then
3. Navigate to Trim.
or
Value Description
0 Throttle trim is centered within servo
range.
-ve value
(-100 Æ -1)
Throttle trim is to the BRAKE end.
4. Change the value.
or
+ ve value
(1 Æ 100)
Throttle trim is to the THROTTLE end.
Adjusting Throttle Trim using the Trim Button
You can also use the T3 trim button to adjust throttle trim.
Trim and EPA I nteraction
A trim (or sub-trim) setting of 100 is equivalent to an End Point setting of 20.