User's Manual

Adjusting Steering Exponential

Use the navigation controls to adjust steering exponential as follows:

1. Access the top function menu from

the driving screen.

men

2. Navigate to the Steering (Ch1)

menu.

or : then

3. Navigate to Expo.

Value Description

0 Neutral steering response (linear).

-ve value

(-1 to -

100)

Milder steering response near

center.

4. Change the value.

+ ve value

(1 to 100)

Quicker steering response near

center.

Steering Sub-Trim

Steering sub-trim adjusts the center

point of the steering servo. This

differs from steering trim in that

steering sub-trim adjusts the servo’s

entire travel range; by moving the

center point of the servo, the left and

right end points (left, right) stay the

same relative “distance” from the

servo center.

Steering sub-trim should be initially

adjusted after you have assembled

your vehicle’s steering system; after

you begin driving the vehicle, use

steering trim to make fine

adjustments to center the steering

within the total steering range.

I f you find that you have to use a large amount of steering sub-trim to get the vehicle

to drive straight, you should consider resetting the steering sub-trim to 0 and re-

adjusting the servo horn on the servo output shaft.