Cov lus qhia

Operation instruction
A. Connect the AC ADAPTOR DC connector to the charging board
B. Insert the AC end of the ADAPTOR into the AC socket
C. During power-on, the three indicators on the panel charge will turn off at the same time
and then turn off to indicate that the power-on self-test is complete.
D. Place the mobile phone to be charged in the middle of the leather surface area of the tablet.
E. If the indicator is on, it indicates that the battery is being charged.
F. When the mobile phone shows that charging is complete, remove the mobile phone and
turn off the power supply of the charging plate.
G. If you want to use USB PORT A or TYPE C, connect the charging board to the device using
the corresponding cable.
Operation mode:
Config
Test Mode
Description
Mode 1
Standby
EUT alone
Mode 2
Operating
10W load on left coil
USB Type-A output 5V1A
USB Type-C output 9V2A or 5V3A
Mode 3
Operating
10W load on right coil
USB Type-A output 5V1A
USB Type-C output 9V2A or 5V3A
Mode 4
Operating
10W load on middle coil
USB Type-A output 5V1A
USB Type-C output 9V2A or 5V3A
Mode 5
Operating
7.5W load on left coil
7.5W load on right coil
USB Type-A output 5V1A
USB Type-C output 9V2A or 5V3A