LED OUTDOOR WALL MOUNT LANTERN model no.
3 model no. 052-7817 | contact us: 1.866.827.4985 Planning Installation 4 Hardware Included 4 Installation 6 Troubleshooting 9 WARNING: Read all safety precautions and installation instructions carefully before installing or servicing this fixture. Failure to comply with these instructions could result in a potentially fatal electric shock and/or property damage.
4 5 model no. 052-7817 | contact us: 1.866.827.4985 PLANNING INSTALLATION PARTS 1. A- Bracket G - Light Sensor A F G Hardware included Hardware Included F - Lantern A: Bracket with screws & nuts (1) D: Wire nuts (3) B: Washers (2) E: Screws (2) C: Screw Caps (2) Parts Pre-Installation 2. Turn off the electrical power at the fuse or circuit breaker box before installing or servicing any part of this fixture.
6 7 model no. 052-7817 | contact us: 1.866.827.4985 Installation CAUTION: before beginning installation turn off the circuit breaker and light switch. STEP 1 Position the mounting bracket (Part A) to the junction box and secure using screws (Part E). Connect the AC wires to the corresponding wires (BLACK to BLACK, WHITE to WHITE and GROUND to GROUND) in the junction box using the wire nuts (Part D).
8 9 model no. 052-7817 | contact us: 1.866.827.4985 Please check the following items before having it repaired. Problem Reason Solution Lights will not come on A. Light switch is turned off. B. Fuse is blown or circuit breaker is turned off. C. Incorrect circuit wiring. A. Turn light switch on. B. Replace fuse or turn circuit breaker on. C. Verify that fixture is wired properly.
