User's Manual

Bx4
17
You can scroll through the band of frequencies using the automatic search function, pre-
set up to 6 favourite radio stations and change stations among the pre-set ones.
Turning on the radio The radio turns on automatically by selecting the “Radio”
menu (scroll through the menu by pressing “on” for 2
seconds).
Turning off the radio The radio turns off when you change the menu item
(scroll through the menu by pressing “on” for 2 seconds)
New station automatic
search
Press “+” and keep it pressed for 2 seconds
Pre-setting a radio station
Press “+” and keep it pressed for 4 seconds.
This function can also be turned on through PC
using the “N-Com Wizard” programme.
Changing radio stations
(among the pre-set ones)
Press “-” and keep it pressed for 2 seconds
11. BLUETOOTH A2DP MUSIC PLAYER
You can listen to high quality music by connecting B4 to a device equipped with Bluetooth
A2DP (Advanced Audio Distribution Profile) protocol.
The B4 system is also equipped with Bluetooth AVRCP (Audio Video Remote Control
Profile) protocol, which allows you to stop and resume music reproduction directly from the
helmet (with devices equipped with AVRCP).
Connection to A2DP music
player
La connessione avviene in automatico all’accensione. Wait
a few seconds for the connection.
Play music (Play)
Press the “+” button and keep it pressed for 2 seconds.
Pause function (Pause) When the player is connected and playing music, press
“+” for 2 seconds.
Next track (Skip) When the player is playing music, press “+” for 4 about
seconds.
Stop playing music (Stop) Press “-” for 2 seconds. The music stops and the A2DP
player is disconnected.
By moving to another function with the menu key, the system automatically disconnects
the A2DP device.
Note: The Bluetooth intercom does not work while listening to an A2DP audio source.
12. AUDIO DEVICES WITH CABLE CONNECTION
N-Com BX4 permette il collegamento via cavo (venduto separatamente) a sorgenti audio
provviste dell’uscita 3,5mm generalmente utilizzata da questi dispositivi per gli auricolari.
Per ascoltare la sorgente audio collegare il cavo al casco utilizzando la presa micro-usb,
avviare la riproduzione audio sul dispositivo, quindi attivare la periferica audio con
l’apposito tasto.
Once it is turned on, cable connection stays active even in the subsequent menus.
Consequently, you can hear the device connected via cable even while listening to music
via A2DP or via RADIO.