User's Manual

The type of command given to the system depends on how long the pushbutton is pressed.

System ON Press “on” and keep it pressed for about 2 seconds, until the

LEDs turn on and you hear a beep in the headset.

System OFF Press “on” and keep it pressed for about 5 seconds, until the

LEDs turn off and you hear a beep in the headset.

Increase Volume Briefly press “+” to increase the volume. A double tone signals

the highest volume level.

Decrease Volume Briefly press “-” to decrease the volume. A double tone signals

the lowest volume level.

5.1. System menu

BX4 features a menu with 3 functions: BASE, RADIO, BIKE TO BIKE (activated upon

request).

To scroll the card functions menu, press “on” for 2 seconds (with system turned on).

A special acoustic beep signals the change from one function to another.

When BX4 is turned on, the menu is always in the “BASE” mode. Depending on the menu

position, you can manage the various audio devices and the available functions:

Menu Functions

Base

 Management of an external source connected via cable

 Use of Mobile phone/GPS with Bluetooth connection

 Use of the intercom “Rider–Pillion Passenger”

 Listening to and management of Bluetooth A2DP player

Radio

 Listening to and management of FM Radio

 Use of Mobile phone/GPS with Bluetooth connection

 Use of the intercom “Rider–Pillion Passenger”

Bike to

Bike

 Use of the intercom “Bike to Bike”

Functions concerning Bluetooth mobile phone management are available in all menu

positions.

Note: The “Bike-to-Bike” menu must be specifically activated from the system (see

chapter 14) or by using the N-Com Wizard programme.

6. N-COM WIZARD

“N-Com Wizard” is the PC application that can be used to manage and

configure the BX4 system.

The programme can be downloaded from the Internet site www.n-com.it, in the

“Download” section. In order to use it, a helmet equipped with BX4 must be connected to

the PC, using the USB cable supplied with the system.

N-Com Wizard allows you to customize your BX4, specifically:

 Setting the system audio levels

 Pre-set and manage your favourite radio stations

 Update the device firmware

 Turn on or off the Bike-to-Bike menu