User's Manual

Bx4

Only for full-face helmets

X701 – X603 - X602 – X551 models

- Arrange the battery connector behind the polystyrene

cheek pad.

- Arrange the cable behind the polystyrene shell or inside the

relevant housing.

Fig. 29

Only for X702 helmet

Fig. 35

 Posizionare l’altoparlante destro

nell’apposita sede del guanciale e

fissarlo utilizzando l’apposito adesivo

(Fig. 35).

 Reposition the right polystyrene cheek

pad in its housing.

Only for full-face helmets: Insert the

chin strap into the polystyrene cheek pad

loop.

Fig. 30

Position the battery connector and wiring

underneath the shell gasket.

Fig. 32

Cut along the pre-cut lines of the plastic

tab on the back of the comfort padding.

Fig. 33

Secure the wiring underneath the plastic tab.

Close the cut parts using the cable fixing

adhesives.