Manualshelf

User's Manual

ManualsBrandsNolangroup ManualsElectronicsMotorcycle helmet communication system with BT transceiver
11121314151617181920
18
11.
RIDER
-
PASSENGER INTERCOM M
ODE
In order to use
B1
in wireless intercom mod
e, both helmets have to be equipped with a
N-
Com Bluetooth system
.
In order for two N-Com systems to communicate with one another, they have to be paired
up first.
11.1.
Intercom affiliation
1.
Make sure both N
-
Com Bluetooth systems are turned off;
2.
Set both N
-
Com
Bluetooth systems in Pairing up mode by pressing
on
(for more than
4 seconds), until the LEDS start to flash quickly;
3. On either one of the two helmets, press
on
briefly;
4. After a few seconds, the helmets recognize each another, a beep is emitted to s
ignal
the pair up was successful and intercom communication is activated;
5. Turn off both N-Com Bluetooth systems and turn them back on to store the pair up
data.
11.2.
Intercom function
To activate the intercom connection, turn on the two N-Com systems and
brief
ly
press
on
on one of the helmets.
I
ntercom activation
With
B1
turned on, briefly press
on
.
I
ntercom deactivation
With
B1
turned on, briefly press
on
.