User's Manual

2. Set both Bluetooth Kits in Pairing up mode by pressing “on” (for more than 4

seconds), until the LEDS start to flash quickly;

3. On one of the two helmets, briefly press “on”;

4. After a few seconds, the helmets “recognize” each another, a beep is emitted

to signal the pair up was successful and intercom communication is

activated;

5. Turn off both Bluetooth Kits and turn them back on to store the pair up data.

12.2. Intercom functionalities

After carrying out the proper pair up procedure, turn on the two helmets. Intercom

connection will be established automatically (this will take a few seconds. Wait until

you hear the acoustic signal confirming the operation).

If automatic connection is not possible, proceed with the manual connection.

Manual intercom activation

With B4 turned on, briefly press “on”.

Manual intercom

deactivation

With B4 turned on, briefly press “on”.

13. BIKE-TO-BIKE INTERCOM

N-Com B4 allows bike-to-bike communication up to a distance of approximately 500

m (in open terrain, with no obstacles).

Note: The communication range and quality may vary considerably depending on the

presence of obstacles, weather conditions, magnetic fields.