User's Manual

22
• The audio coming from an external source (connected via cable or Bluetooth) IS
NOT shared with the helmet connected in Bike-to-Bike Intercom mode.
• The audio coming from the radio IS NOT shared with the helmet connected in
Bike-to-Bike Intercom mode.
• In case the bike-to-bike intercom mode is on and there is no connection with the
other Rider due to out-of-range distances, the two helmets will be automatically
reconnected as soon as the distance is reduced within a range where
communication is possible.
12. INTERCOM VIA CABLE
In order to use N-Com Bluetooth Kit3 as intercom via cable, you need to use an
Intercom Wire (sold separately) to connect the two helmets.
• Install the Basic Kit2 + Bluetooth Kit3 in the Rider's helmet.
• Fit the Pillion Passenger’s helmet with Basic Kit2 (positioning the basic electronic
card in its housing).
• Connect the Rider’s helmet to the Pillion Passenger’s helmet using the Intercom
Wire (sold separately) in the following manner:
- connector A (smaller, L-shaped) in the Rider’s helmet (equipped with Bluetooth
kit3)
- connector B (larger one) in the Pillion Passenger's helmet.