User's Manual

4.1. Basic functions

All N-Com system functions are available through the operation of three pushbuttons:

“ ”, “on” and “ ”. Every time the system is given a command, a special acoustic

signal can be heard, which varies depending on the function being requested. This

way, all the functions can be used while wearing the helmet.

The type of command given to the system depends on how long the pushbutton is

pressed.

System ON Press “on” and keep it pressed for about 2 seconds, until the

LEDs turn on and you hear a beep in the headset.

System OFF Press “on” and keep it pressed for about 4 seconds, until the

LEDs turn off and you hear a beep in the headset.

Increase Volume Briefly press “” to increase the volume. A double tone

signals the highest volume level.

Decrease Volume Briefly press “” to decrease the volume. A double tone

signals the lowest volume level.

4.2. System menu

Bluetooth Kit3 features a menu with 3 functions: BASE,

RADIO, A2DP.

To scroll the card functions menu, press “on” for 2 seconds

(with system turned on).

A special acoustic beep signals the change from one function

to another.

When Bluetooth Kit3 is turned on, the menu is always in the “BASE” mode.

Depending on the menu position, you can manage the various audio devices and the

available functions: