User's Manual

3. INSTALLATION

Bluetooth Kit3 can be installed on all Nolan helmets pre-set for the N-Com system.

In order to use the N-Com Bluetooth Kit3 system, the Nolan helmet must be

equipped with the Basic Kit2 (or Basic Kit), sold separately.

Note: Before using the N-Com Bluetooth Kit3 system, the battery must be installed

and recharged (see instructions for Basic Kit).

• Install the Basic Kit2 (or Basic Kit) on the helmet, according to the specific

instructions.

Fig. 1

Fig. 2

Fig. 3

• Remove the N-Com protection

plate from the helmet (Fig. 1).

• Peel off the protective film from

the gasket.

• Apply the gasket around the

connector as shown in Fig.2 and 3.