User's Manual

Note: In the event that the keyboard is not positioned correctly, peel it off right away with extreme care

and repeat the positioning.

Note: It takes up to 24 hours for the keyboard to stick completely. During this time, do not expose the

helmet to atmospheric agents.

　 Line up the keypad flex connector to the e-box making sure that the letter

“n” is pointing as shown

in Fig. 6.

　 Gently position the connector in its seat until it is all the way in (Fig. 7).

　 Switch on the N-Com system (press

“ON” for about 2 seconds) to verity its proper operation.

N.B. If the system does not work, remove the flex and repeat the previous operation, making sure

that the

“n” is positioned as in Fig. 6.

　 Secure the keypad flex in the specials stop (Fig. 8).

Fig. 6 Fig. 7 Fig. 8

　 Position the e-box in its seat, arranging the keypad flex cable so that it does not interfere with the

positioning of the e-box, as illustrated in figures 9-10-11.

Fig. 9 Fig. 10 Fig. 11

　 Position the left loudspeaker in its seat, inserting the cable in the

special groove. If necessary, secure the earphone using the

adhesive supplied as standard equipment (Fig. 12).

Fig. 12