User's Manual

EN
9. MOBILE PHONE
To pair up a mobile phone to the B601 system, follow the procedure illustrated in Chapter 8.
Answering a phone call
Briefly press any key when you hear the incoming call signal.
Voice call
Press “n” and keep it pressed for about 2 seconds.
Hanging up/rejecting a phone call
Press “n” and keep it pressed for about 2 seconds.
Manual phone connection
Press “n” and keep it pressed for about 2 seconds.
9.1. Speed dial
Using the N-Com EASYSET program, you can store up to 3 of your favourite numbers,
which you will be able to dial from the
“Speed Dial” menu.
Saving the Speed Dial numbers
To assign one or more speed dialling numbers:
Put the system in the “Configuration” mode: starting from a switched off system, press the “n” key and
keep it pressed for 4 seconds, until you hear the voice announcement
“Con figuration”.
Press the key “-” or “ ” until you hear the voice command “Speed dial”.
Press the “n” confirmation key. You will hear the voice announcements “Speed dial 1” and “Phone
connected
”.
Press the keys “-” or “ ” to select the speed dialling number to be assigned. The saved position is
confirmed by the voice announcement
“Speed dial 1“/ “Speed dial 2 ” / “Speed dial 3”.
On your own mobile phone (paired up and connected to the N-Com system), call the phone
number you wish to assign to the selected speed dialling position. The call is interrupted before it
goes through, and the selected number will be saved; at this point you will hear the special voice
announcement confirming the selection (
“Save Speed Dial 1” / “Save Speed Dial 2” / “Save Speed Dial
3”
).
You can also configure these setting through the program “N-Com EASYSET”.
Using the stored numbers
To access the “Speed Dial” menu, press at the same time the “n” and “ ” keys (“Speed Dial”), then
use the keys
“-” and “ ” to scroll through the menu items.
Then press the
“n” key to confirm the selection of one of the following items:
Last number redial
Speed Dial 1
Speed Dial 2
Speed Dial 3
Cancelled
If you wish to exit the “Speed Dial” menu, press the keys “-” and “ ” until you hear the command
“Cancelled”, then press “n” to confirm.
N.B.: If no key is pressed within 15 seconds, the system exits the “Speed Dial” menu.
18