User's Manual

Table Of Contents

• The N-Com B901 systems keeps an active connection with a mobile phone even during

Bluetooth communication with other intercom systems.

• The intercom system connected to N-Com B901 may not allow simultaneous connection to a

mobile phone.

• Only one system paired up in Universal Intercom mode can be stored.

15.3. Universal Conference (chain intercom)

The “Universal Conference” mode can be used to connect in conference call N-Com systems of the

“900” series and one system paired up in Universal Intercom mode.

N.B.: This mode can also be used by connecting only N-Com “900” series systems, in alternative to the

“Smart Conference” mode (chapter 14.3).

The connection procedure is outlined in the diagram provided here below:

1. System A must have been paired up beforehand to two B systems (Universal Intercom pair

up) and C.

2. System A has to initiate the first intercom connection with system B (Universal Intercom), by

pressing the relative intercom connection command.

3. At this point, system C can join the intercom conference call, establishing an intercom

connection with system A.