User's Manual

3.1. Removing the B1.4 system from the helmet

Proceed as follows to remove the B1.4 system from the helmet:

 Remove the cheek padding and the shell gasket;

Fig. 7

 Remove the keypad from the shell, using a

flat head screwdriver (or a similar tool) to

lever upwards in the special hollow as

shown in fig. 7.

Fig. 8

 Unhook the right and left clips from the

shell, levering upward using a flat head

screw (or a similar tool), as shown in figure

 Completely remove the B1.4 system from the helmet and re-install the cheek padding and the

gasket.