User's Manual

Adjusting the volume
To increase the volume
Click the Volume Up button + to increase volume by 1 step.
Repeat this until you have reached the desired level.
To decrease the volume
Press the Volume Down button - to decrease volume by 1 step.
Repeat this until you have reached the desired level.
Remote controls on Music Speaker
Using Music Speaker’s remote control feature you can control
your stereo player using the buttons on Music Speaker itself.
Note: This feature is player dependent; please make sure your player
supports the “AVRCP” Remote Control profile in order to use this
feature.
Play/Pause control
Click the Play/Pause button on Music Speaker. The stereo player
will switch between Play and Pause at each click.
Play Next
Press the Next button. The stereo player will start to play the next
track in the play list.
Play Previous
Press the Previous button. The stereo player will start to play the
previous track in the play list.
Pairing Music Speaker with your
Bluetooth Mobile Phone
Pairing is the procedure for linking two Bluetooth devices. You
need to pair your Music Speaker with your mobile phone before
you can use Music Speaker to receive or make calls. After pairing
is complete you can use the Music Speaker only with the paired
mobile phone. If you wish to use Music Speaker with a different
mobile phone you must redo the pairing process with the new
mobile phone. In this case the Music Speaker will no longer work
with the previous mobile phone.
.
Pairing Music Speaker with your phone
Before you commence pairing ensure that the batteries on both
your mobile phone and Music Speaker are fully charged.
Pairing steps:
 Turn on Music Speaker. It will go into pairing mode
automatically as indicated by the amber and blue LEDs
flashing alternately.
 Turn on your mobile phone and place it within a few meters of
Music Speaker.
 On your phone initiate the device discovery procedure. (Refer
to your phone’s user guide for details of how to initiate this
feature)
 After a few seconds your phone should display Music
Speaker’s Bluetooth name: “BlueBox”.
 When prompted by your phone enter the default pin code
“0000”.
 When pairing is complete, the amber LED will switch off and
the blue LED will blink slowly.
Making Calls
To make calls from your mobile phone
Dial the call from your mobile phone. Stereo playback will stop and
the call will be connected to Music Speaker automatically.
To make calls using voice dialing
Click the Talk button on Music Speaker. After you hear the voice
dial tone, speak the name of the person you wish to call. The call
is automatically connected to your mobile phone and Music
Speaker.
To make calls using last number redial
Press and hold the Volume Up + button on Music Speaker for
about 2 seconds. Release the button. The last dialed number will
automatically connect to your mobile phone and Music Speaker.
Receiving calls
When there is an incoming call you will hear a ring tone from
Music Speaker. Click the Talk button on Music Speaker and the
call will be connected.
Reject calls (if supported by your mobile phone)
When there is an incoming call you will hear a ring tone from
Music Speaker. Press and hold the Talk button on Music
Speaker for more than 2 seconds. The call will be rejected.
You can also reject the call on your phone directly.
Muting / Unmuting calls
While on a call press in the Mute button on Music Speaker. The
microphone will be disabled. Press and release the button to
activate the microphone.
Transfer calls
You can transfer a call from Music Speaker to your mobile phone
handset and from your handset to Music Speaker. With the
phone call on Music Speaker, press and hold Talk button for 3
seconds. The call will be transfer to your mobile phone.
To get the call back on Music Speaker simply click the Talk
button.