User's Manual

4/4
(b) Ending a Call:
Short press the MFB, to end your call or end the call via your mobile handset in the normal way. You will
hear a beep from the headset when your call is completed.
(c) Reject a Call:
When you hear the ringing tone, press and hold the MFB on your Bluetooth headset for 3 seconds until you
hear a beep.
(d) Voice Dialing:
If your mobile handset is voice dialing enabled, in standby mode, press the MFB and when you hear a
beep, say the voice tag.
IMPORTANT: Please make sure to record voice tag into the mobile handset before you use the voice
dialing function. This function is only supported by mobile handsets with a Bluetooth Hands-Free Profile.
You may not hear the beep, using certain mobile phone models. Please refer to your mobile handset user
guide for additional information.
(e) Last Number Re-Dial:
In standby mode, short press the MFB button twice to redial the last number.
(f) Adjusting the Volume:
During conversation, press the volume buttons repeatedly until you reach the desired volume level.
(g) Mute & Un-mute:
(1)Mute the headset: Press the V+ button for 3 seconds. The LED will flash blue.
(2)Un-mute the headset: Press and hold V+ and V- buttons simultaneously.
(h) Call Inter-Changing:
(1)Headset to Handset: During conversation, press V- button for 3 seconds.
(2)Handset to Headset: Press the V- button for 3 seconds or MFB button, depending on the features
available on your phone model.
LED Indication
Headset Mode Amber LED Blue LED Sound
Off Mode
Off Off
Power On
On for 1 sec. 2 beeps
Power Off
On for 1 sec. 2 beeps
Standby - before Pairing
Flashes 2 times every 2.5
sec.
Standby - after Pairing
Flashes once every 2.5 sec.
Standby - Low Voltage
flashes 2 beeps
every 30
sec.
Talking in Progress
Flashes 3 times every 2.5
sec.
Pairing in Progress
Flashes alternatively
Pairing Completed
Flashes once every 2.5 sec. 2 beeps
Mute
Flashes 3 times every 2.5 1 beep