User's Manual

3/3
Pairing with a Mobile phone
(a) Place the Bluetooth headset and mobile phone at a distance of up to 1 meter from one another.
(b) Make sure the headset is in off mode.
(c) Press and hold the MFB for 5 seconds until the headset LED flashes amber and blue alternately. It is now
ready for pairing.
(d) Activate your mobile handset’s Bluetooth accessing function by referring to your mobile handset user guide
for details. Meanwhile, the handset will search for accessible Bluetooth devices.
(e) Select “BTHS” from the list.
(f) Enter the pre-programmed passkey “0000” and press “OK” to pair the headset and the handset. When
pairing is completed, you may hear two beeps and the LED will flash blue and amber alternatively every
2.5 seconds. Now the headset is in standby mode.
(g) Return and to go back to your handset’s main menu. (Most mobile handset models, will display a headset
icon.) You should now be able to make/receive calls through the headset. Please place the mobile
handset at a distance of up to 10 meters from the headset. (Any obstacle may result in a shorter sensing
distance.)
IMPORTANT: Under pairing mode, if pairing procedures are not completed within 2 minutes, the headset will
be in standby mode and will emit a beep. Please repeat steps (b) to (g) to re-pair the headset and mobile
handset.
Connection/Link to a Mobile Handset
When pairing is completed, the headset is in standby mode. Before you place or answer a call, if the headset
ICON is not displayed on the handset screen, please follow the simple steps to activate the Bluetooth
connection/link through your handset or headset until the headset ICON is on the screen.
(a) On Handset: Select “BTHS” from the list of paired devices on your handset screen.
(b) On Headset: Short press the headset MFB and select “Accept” on the handset screen to accept the
connection.
IMPORTANT: Whenever the Bluetooth connection/link is removed and you cannot see the headset ICON on
your mobile phone’s screen, please follow the activate connection/link steps.
Disconnection to the Mobile Handset
You may connect your headset with another Bluetooth mobile handset. Please follow the simple steps to
disconnect your Bluetooth headset with the pre-paired handset.
(a) Power off the headset.
(b) Select “Disconnect” to remove the previous connection from your handset list.
Using the Headset
Once the pairing is completed and the battery is fully charged, you may access the following functions. Some
of the functions listed below are only accessible on handsets supporting a Hands-Free Profile.
(a) Answering a Call:
To answer a call, wait for the ringing tone from the headset, then short press the MFB on your Bluetooth
headset to accept the call, or answer the call via your mobile handset in the normal way.