User's Manual

2/2
About the Bluetooth Headset
This versatile & super slim/light weighted Bluetooth Headset is specially designed for users to enjoy the
convenience of wireless communication. It also supports Skype compatible VoIP calls. The latest Bluetooth
technology Version 2.0 with EDR, gives users impeccable sound quality.
About Bluetooth Technology
Bluetooth wireless technology revolutionizes personal connectivity by providing freedom from wired
connections-enabling links and connectivity between mobile computers, mobile phones, portable handheld
devices and other Bluetooth enables devices within 10 meters. Utilizing global sound & digital data 2.4G ISM
transmission, Bluetooth Technology has revolutionized the way users communicate globally.
Getting to Know Your Bluetooth Headset
Getting Started
The Bluetooth headset comes with a built-in rechargeable battery. Prior to using the headset, it is
recommendable to charge the battery fully for the first time. Please follow these simple steps:
(a) Charge your headset. Prior to using the headset, it is recommendable to charge the battery fully.
(b) Connect the charger to an AC wall outlet and the charge plug to the headset’s charging socket. When the
charge is completed, remove the charger from the headset and the wall outlet.
(c) Your headset and Bluetooth-enabled mobile phone should be no more than 1 meter apart for pairing.
(d) Your headset and mobile phone should be within 10 meters (max.) during operation - Bluetooth sensing
distance.
IMPORTANT:
(a) Charge time: Normal full charge time is 2 hrs. (Approx.).
(b) Charge indication: When the charge is in process, the LED flashes amber. When the charge is
completed, the LED will be off.
(c) Low voltage indication: You may hear 2 beeps from headset every 30 seconds with LED flashing amber.
It is recommended to charge the headset immediately to prolong life of battery and standby time. Under
low voltage, if the battery is not charged within a certain time – 30 seconds (approx.), the headset will be
powered off.
(d) Charging indication will be delayed for a few minutes if the headset has not been used for a long time or
the battery is drained.
Turning On/Off the Headset
Turning On - Headset in off mode:
(a) Press and hold the MFB on your headset for 3 seconds until you hear a short beep. The LED will flash
blue for 1 second.
(b) Headset will be in standby mode. The LED will flash blue.
Turning Off – The headset in any modes:
(a) Press and hold the MFB for 5 seconds until you hear a long beep. The LED will flash amber for 1 second.
(b) Headset will be off.
IMPORTANT: Press the MFB each time you turn on the headset to re-activate the pairing so that the
connection between the headset and the paired mobile handset is resumed. Please refer to the procedures for
“Pairing”.