User's Guide
5
Copyright Nolan Systems Inc. 2005
info@nolan-sys.com
http://www.nolan-sys.com/
This material may not in whole or part be copied, or communicated to third parties without Nolan Systems prior agreement in
writing.
Nolan Systems – USA
1595 Cleo Springs Dr.
San Jose, Ca. 95131, USA
Tel: 408-392-0928 Fax: 408-392-0998
Press and hold the TALK button for 3 seconds. You will hear a OFF tone or the LED
will light off. The headset is turned off. Then release the Talk button.
Making calls
You can make calls from your mobile phone, or directly from headset using voice
dialing (if it’s supported by the phone)
To make calls from your mobile phone
Dial the call from your mobile phone, and the call is automatically connected to your
Headset.
To make calls using voice dial
1. Short press the Talk button on the Headset,
2. Speak the name of the person you wish to call. The call is automatically
connected to your headset.
Answer / Reject / End calls
Once Headset is successfully paired with your mobile phone, you can use the headset
to receive calls.
Answer / Reject calls
When there is an incoming call, if the Headset is turned on, you can hear a RING tone
from headset to indicate the incoming call.
1. Short press Talk button to answer the call
2. Press and hold the Talk button for 3 seconds to reject the call.
End calls
When you have finished your call, short press Talk button will end the call.
Transfer calls
You can transfer the calls connected to your headset back to your mobile phone, or from your
mobile phone to your headset.
To transfer calls from your headset (phone dependent)
With voice in headset, press and hold volume up button for 4 seconds on your headset, the
call will transfer to you mobile phone.
To transfer calls from you mobile phone
With the call connected to your mobile phone, Press volume up button on your
headset.
Adjust the volume
To increase the volume
While in talking mode, press (click) the Volume button + to increase volume by 1 step,
repeat this procedure until you have reached the desired level.
To decrease the volume