User's Manual

INTRODUCTION TO THE DEVICE
2
10 30 50 70 90
54
Settings button to access all settings
Pinpoint / Confirm button
Up Arrow: Sensitivy Increase
Speaker
LED Flashlight
Search coil input socket
Left Arrow (-): Left side navigation in
notch discrimination and mode selection
& change the value of any setting
Right Arrow (+): Right side navigation in
notch discrimination and mode selection
& change the value of any setting
Down Arrow: On-Off/Hard
To turn the device on and off press
and hold down for about 3 seconds.
For a hard reset in case of any
unresponsiveness of the system, press
and hold down for about 6 seconds.
Wired headphones and charger input
socket
IMPORTANT! When the connectors are
not in use, keep them closed with the
plastic cap! When putting the plastic
cap on, make sure that you let the air
out! Otherwise, the cap may pop off.