User's Manual

18
CHECK COIL ICON
It indicates an interruption in the search coil transmitter signal. The search coil connector
may be unattached, loose or disconnected. If you own another detector with the same coil
connector, please be sure that you have not attached the wrong coil by mistake. If none of
the above exists, the search coil or its cable may have a defect. If the issue continues when
you change the search coil, there may be an issue in the coil control circuit.
SOFTWARE UPDATE
SIMPLEX+ has software update capability. All software updates made after the device is released to
the market will be announced on the product's web page along with updating instructions.
System Version Information:
The software version of the SIMPLEX+ will be displayed at the bottom of the screen each time you
turn the detector on.
!