User's Manual

4
ASSEMBLY
WARNING: If you change the coil while the device is on, you must retune the
device by pressing the on-off / retune button once.
In order to not lose the PulseDive while using it underwater or on land, we
recommend you to attach the security lanyard as shown in the below picture.
7) Attach one end (a) of the security lanyard to the hole located at the back of
the control unit and the other end with the snap hook (b) to your belt or wrist
band.
In order to carry the PulseDive on your waist and not to lose it, we recommend
you to use the belt holster and the security lanyard as shown in the below
picture.
8) Attach one end (a) of the security lanyard to the hole located at the back
of the control unit and the other end with the snap hook (b) to the belt holster
loop.
7
a
b
8
a
b